"PROINTER AC" is a small inner connector for tile, wood and marble coverings and floors. It facilitates cleaning by preventing dust, dirt and moisture penetrating corners, and allows the necessary expansion of inner corners in relation to an adjacent structure. It is durable and aesthetically pleasing. Available in several sizes and finishes. In AISI stainless steel 304 – 1.4301 10/10 thickness in the following finishes: Polished – Super Polished – Mirror Line – Satin. The "PROINTER AC" is very resistant to corrosion and oxidation, detergents, solvents and acids. It can also be used to join coverings with baths, sinks and toilets, and shower units by applying silicone to the upper and lower parts of the square, preventing the appearance of ugly silicone that has been yellowed and blackened by time.

LAYING INSTRUCTIONS
1: Choose the ‘’PROINTER AC/AL’’ with suitable height for the thickness of the covering. 2: Apply the adhesive onto the area of application of the profile. 3: Lay and align the profile, cut to the necessary length, pressing the perforated flange into the adhesive. 4: Lay the tiles under the curvature of ‘’PROINTER AC/AL’’ and align them so that the outer curved part of the profile covers the perpendicular tiles. 5: Fill the profile/tile area of contact with adhesive to prevent the accumulation of water in any voids. (When laying on bathtubs, sanitary ware and shower trays, fill the rear part of the profile on both sides with silicone to prevent infiltration of water). IMPORTANT: Pay attention to the external edges of the "Prointer". They must be protected against agents such as adhesives and sealants and against grinding or scraping actio